Services Details

• Select a suitable location for both indoor and outdoor units for AC installation in Delhi. Our technicians ensure that the units should be close to each other with proper distance for efficient functioning.
• Drill holes in the wall for piping and cables to connect the indoor and outdoor units. Our expert technicians ensure that the holes are at the right angle and size.
• There are more than 10 feet of pipes inside our installation and if more than 10 feet of pipe is required and the pipe is provided by us, it incurs additional charges and if more than 10 feet of pipe is required and the pipe is provided by the customer, so you need to pay labour charges for pipe installation.
• Install the indoor unit on the wall using the mounting plate. Make sure it is level and securely in place for the best AC installation in Delhi.
• Connect the refrigerant pipe, drain pipe and electrical cable from the indoor to the outdoor unit through the drilled holes.
• Install the outdoor unit on a stable surface, preferably a concrete pad. Ensure proper air flow around the unit for efficient cooling.
• Connect the power supply to the outdoor unit, ensuring proper electrical connections and following safety protocols.
• Test to check whether the AC is cooling effectively and whether there are any leaks or problems with the installation.
• Insulate refrigerant pipes to prevent energy loss and ensure efficient cooling.
• Our technicians ensure that the wires are secured and arranged neatly, protecting them from external elements.
• Check thoroughly for refrigerant leaks and correct any problems immediately.
• Verify that all components are securely installed, and there are no loose connections. Double check settings and controls.
• We offer a 15 days warranty on our indoor and outdoor gas connections and for water leakage.
• During the process of installation, if the customer brings any part or item himself, then its warranty is not valid and additional charges are applicable for refilling or fitting of that item. If there is any dirt at the customer site, we clean it first.

• It is important to prioritize safety before starting the gas charging process. Switch off the AC unit, disconnect the power supply and allow the unit to cool. Always wear protective gear, including gloves and safety goggles, to avoid contact with refrigerant and other potentially harmful substances.
• Our technicians locate the valve before starting the gas refilling process as the AC unit is equipped with a service valve that provides access to the refrigerant lines. These valves are commonly found on outdoor and indoor units. Identifying and locating these valves is an important step before beginning the gas filling process.
• If the AC unit is opened for repair or maintenance, the old refrigerant must be recovered using a reclamation unit. This ensures proper disposal or recycling of the refrigerant as per environmental regulations.
• Once the AC unit is ready, connect the charging hose to the refrigerant source and low pressure service valve. It is important to use the correct type of hose for the specific refrigerant being used.
• It is important to remove air from the charging hose before adding refrigerant to the AC unit. This is typically done using a vacuum pump, creating a vacuum that removes air and moisture, preventing contamination of the refrigerant.
• Once the hoses are ready, slowly open the valve at the refrigerant source to allow the gas to flow into the AC unit. Monitor the pressure gauge to ensure a controlled and steady increase in pressure. Overcharging the AC can result in inefficiencies and possible damage.
• While charging, it is advisable to inspect the AC unit for any signs of refrigerant leaks. Common areas prone to leaks include connections, valves, and the evaporator or condenser coils. Addressing leaks promptly ensures the longevity and effectiveness of the AC unit.
• Continue to monitor the pressure level on the gauge during the charging process. Once the recommended pressure is achieved, close the valve at the refrigerant source and disconnect the charging hose.
• After completing the gas charging process, restart the AC unit and assess its cooling performance. Verify that the air flowing from the vent is cool enough, and that the system maintains the desired temperature
• Perform a final inspection to confirm that all connections are secure, there are no visible leaks, and the AC is running smoothly. Document the type and amount of refrigerant added, maintaining records for future reference and maintenance.
• We give 3 months warranty from the repair point, where we have repaired but the warranty also depends on the condition of your cooling coil. Under our warranty and repairing, we repair only 2 or 3 repair points.
• If any additional parts or accessories are required or fitted with the AC so charge will be extra for part. If there is any dirt at the customer site, we clean it first.
• During the process of gas charging, if the customer brings any part or item himself, then its warranty is not valid and additional charges are applicable for refilling or fitting of that item.

First of all we check the AC properly. If everything goes well then we serve. If any problem occurs we will inform the customer first. Then we ensure that the power to the AC unit is turned off before service. Regularly Clean air filters to maintain proper airflow and efficiency. We do indoor cleaning by a jet machine with a service jacket. Check both the indoor and outdoor coils for dirt. Clean them if necessary. Our technician Ensures that the condensate drainage lines are clear of any blockages. Then we Inspect refrigerant levels and inform the customer if the level is low. If the customer agrees for gas charging then our technician does gas charging and there is extra cost. Examine the ductwork for leaks or damage. Check for any loose connections, damaged wires, or faulty electrical components. Again, if you're not experienced with electrical work, it's best to consult a professional. We do not give any kind of warranty on AC service.

During the visit, we check the machine and diagnose the problem, then explain the solution and repair charges. There are no repairs in the visit charge. If you agree with the cost of repair then we will fix the problem otherwise a visit fee is mandatory for diagnosing the problem.

Disconnect power to the AC unit from the circuit breaker. We safely handle and pack the refrigerant. Remove the front panel. Disconnect the electrical connections. Unscrew and remove the indoor unit from the wall. Disconnect power and electrical connections. Remove the outdoor unit cover. Unscrew and take off the outdoor unit from its brackets. Remove wire and connection. We disconnect gas lines from both units. Patch up holes from the mounting brackets. We don’t pack AC in Box and do not transfer the AC to another location. We don’t give warranty in uninstallation service.